Façade Systems Compared — Curtain Wall, Structural Glazing & Rainscreen
Stick vs unitised curtain wall, structural glazing vs capped, ventilated rainscreen and window-wall — compared on how they are built, speed, best building height, performance and relative cost. The system-selection authority for Ghana, with the real performance standards (ASTM E283/E331/E330, AAMA 501, EN 1090). Facade Ghana, since 1982.
Unitised Curtain Wall Systems
Unitised curtain wall for Ghana high-rise: factory-assembled, storey-high units that lock together at weather-sealed interlocks for fast, quality-controlled tower install — performance-tested to ASTM E283 (air), E331 (water) and E330 (structural wind load). Facade Ghana, since 1982.
Curtain Wall Cost in Ghana (2026) — Price Per m²
How much does a curtain wall or glass façade cost in Ghana? Honest 2026 ranges — installed aluminium curtain wall ~280,000–311,000 F CFA/m² (francophone-West-Africa benchmark, directly quoted as a regional comparison), global reference US$180–500+/m², and why a Ghana commercial façade is genuinely priced on survey. Per m², material vs installed, value framing. Facade Ghana, since 1982.
Ventilated Rainscreen Systems
Ventilated rainscreen façade engineering by Facade Ghana for Accra — a back-ventilated, drained cavity behind an outer skin of ACP, ceramic, terracotta or fibre-cement, engineered for thermal and moisture performance in a tropical climate, with fire-classed skins to EN 13501-1. Since 1982.
Structural Glazing (Frameless)
Structural silicone glazing and frameless glass façades engineered by Facade Ghana for Accra — glass structurally bonded to the frame for minimal sightlines and a flush exterior, performance-tested to ASTM E283/E331/E330 and AAMA 501, with the silicone-bond QA discipline that makes it safe. Since 1982.
Stick-Built Curtain Wall
Stick-built curtain wall for Ghana: mullions, transoms and glazing assembled piece-by-piece on site — flexible, site-tolerant, and performance-tested to ASTM E283 (air), E331 (water) and E330 (structural wind load). Facade Ghana, since 1982.
Solar-Optimised Facade Engineering
Solar- and thermal-optimised façade engineering for the tropics — low-E / solar-control glass, solar-heat-gain-coefficient (SHGC), external shading and brise-soleil, orientation and glazing ratio engineered to cut cooling load across Ghana. Facade Ghana, since 1982.
Facade BIM Coordination (Level 2)
Façade BIM coordination for Ghana — 3D façade modelling, clash detection against structure and M&E, fabrication-level coordination and LOD progression, managed within the ISO 19650 information framework to cut site rework on complex envelopes. Facade Ghana, since 1982.
Wind-Load + Pressure Testing
Façade wind-load and performance testing for Ghana — ASTM E330 structural (wind) load, ASTM E283 air infiltration, ASTM E331 and AAMA 501.1 dynamic water penetration, and full-scale mock-up testing for high-rise. Facade Ghana proves the envelope before it goes on the building, since 1982.
Heritage Facade Restoration
Heritage and period façade restoration for Ghana — careful condition surveying, matching original materials and details, conserving the features that give a building its character, and sensitive repair or re-cladding done as conservation craft rather than replacement. Facade Ghana, since 1982.